Wednesday, October 23, 2019 | ePaper

Hazardous Wastes

Modify Manufacturing Processes To Mend It

  • Print
Shishir Reza :
Hazardous waste means a waste or combination of waste which because of the quantity concentration or physical, chemical characteristics may cause or contribute to increase in mortality or an increase in serious illness or potential health hazard or environmental degradation.
Setting the Scene
Hazardous waste is a waste with properties that make it potentially dangerous or harmful to human health or the environment. The universe of hazardous wastes is large and diverse. Hazardous wastes can be liquids, solids, or contained gases. They can be the by-products of manufacturing processes, discarded used materials, or discarded unused commercial products, such as cleaning fluids (solvents) or pesticides. In regulatory terms, a hazardous waste is a waste that appears four characteristics - ignitability, corrosivity, reactivity, or toxicity. However, materials can be hazardous wastes even if they are not specifically listed or don't exhibit any characteristic of a hazardous waste. For example, "used oil," products which contain materials on California's M-list, materials regulated pursuant to the mixture or derived-from rules, and contaminated soil generated from a "clean up" can also be hazardous wastes. There are mainly three types of hazardous waste; such as: (i) Radioactive wastes (ii) Medical wastes and (iii) Non radioactive industrial liquid waste.
Types and General Features
All nuclear reactors rely on uranium as fuel. The natural uranium contains 99% of U-238 and 1% of U-235. It can be used as such in heavy water reactors. For use in light reactors, it should be enriched about 3 to 3.6% with respect to U-235 content in an isotope enrichment plant. The enriched uranium is fabricated into fuel rods and is inserted in nuclear reactors. During operation of the reactor, the fuel rods become intensely radioactive due to the generation of fission products and Trans uranium elements such as plutonium americium and curium. After the fuel rods are removed from the reactor, they should be cooled in water-filled pools to remove the heat liberated due to radioactive decay. The fuel cycle is than completed by disposing of the fuel in an underground repository or separating the residual plutonium from uranium and fission products. The fission products are than immobilized by incorporating into ceramic or glass matrix and disposed off into an underground repository.
Biomedical waste originates from hospitals, clinics, research and testing laboratories and drug companies. These include pathological and surgical waste: experimental animals and cadavers, drug and chemical residues and their containers; discarded bandages, linens and infectious waste; disposable syringes, needles and surgical instruments, contaminated equipment, food and other waste materials. Chemical and chemotherapy waste, organic solvent waste and radioactive waste are not included in the biomedical waste because they are governed by different regulations. The normal practice of handling hospital waste is the on-site incineration of the combustible solids in a specially designed high temperature incinerator provided with after burners to heat the gases leaving the chamber to 700 degree Celsius for controlling odors. The ash thus produced is disposed in sanitary landfills.  
Modern civilisation has resulted in large scale manufacture of products such as TV sets, aerosol cans, pesticides, plastics, preservatives, automobiles. These industries generate a multitude of hazardous industrial waste, toxic substances such as heavy metals. Proper management of this hazardous industrial waste is mandatory from the point of view of public health and environmental protection; especially for the wastes that produce from industrial activities such as printing activities, mining activities and other industrial activities.
Impacts of Hazardous Waste
The particulate and electromagnetic radiation emanating from radioactive materials inflict deleterious effect on the living cells. These effects are classified as somatic and genetic. Somatic effects are caused on the exposed individuals and the cell damaged caused manifest in malignancies' such as leukemia or cancer. Genetic effects are transmitted to the descendants of the exposed individuals and thus can effect unexposed generation too. The radiation induced changes in the genes may manifest themselves in- Gene mutations, Chromosomal aeration and Changes in the number of chromosome.
Such changes can result in abnormalities in the offspring which may be mild or lethal. Hazardous and toxic wastes are waste materials that cause health problems, including birth defects, neurological disorder, reduced résistance to infections and cancer. Environmental costs of hazardous and toxic waste include contamination of water supplies, poisoning of soil and destruction of habitat.
How to Manage Hazardous Waste?
1. pollution should be prevented or reduced at the source whenever feasible; 2.pollution that cannot be prevented should be recycled in an environmentally safe manner whenever feasible; 3.pollution that cannot be prevented or recycled should be treated in an environmentally safe manner whenever feasible; and 4.disposal or other release into the environment should be employed only as a last resort and should be conducted in an environmentally safe manner.
Converting Less Hazardous Substance
Several processes are available to make hazardous materials less toxic. Physical treatment ties up or isolates substances. Charcoal or resin filters absorb toxins. Distillation separates hazardous components from aqueous solution. Precipitation and immobilization in ceramics, glass or cement isolate toxins from the environment; so that they become essentially non-hazardous. One of the few ways to dispose of metals and radioactive substances is to fuse them in silica at high temperature to make a stable, impermeable glass that is suitable for long term storage. Plant, bacteria and fungi can also concentrate or detoxify contaminants.
Incineration is applicable to mixtures of waste. A permanent solution to many problems, it is quick and relatively easy, but not necessarily cheap - nor always clean- unless done correctly. Wastes must be heated to over 1000 degree Celsius for a sufficient period of time to complete destruction. The as resulting from through incineration is reduced is volume up to 90% and often is safer to store in a landfill or another disposal site than the original site. Nevertheless, incineration remains highly controversial.
Chemical processing can transform materials so they become nontoxic. Included in this category are neutralisation, removal of metals or halogens and oxidation. The Sunohio Corporation in Ohio, for instance have developed a process called PCBx, in which chlorine in such molecules as PCBx is replace with other ions that render the compounds less toxic. A portable unit can be moved to the location of the hazardous waste, eliminating the need for shipping them.
 Storing Permanently
Secure landfill one of the one of the most popular solution for hazardous waste disposal has been land filling. Although as we saw earlier, many such landfills have been environmental disaster, newer technique make it possible to create safe, modern secure landfills that are acceptable for deposing of many hazardous waste. The first line of defense n a secure landfill is a thick bottom cushion of compacted clay that surrounds the pit like bathtub. Moist clay is flexible and resists cracking if the ground shifts. It is impermeable to ground water and will safely contain waste. A layer of gravel is spread over the clay liner and perforated drainpipes are laid in a grid to collect any seepage that escapes from the stored materials. A thick polyethylene liner, protected from punctures by soft padding materials, covers the gravel bed.
When the landfills has reached its maximum capacity, a cover much like the bottom sand witch of clay, plastic and soil-in that order - caps the site. Vegetation stabilizes the surface and improves its appearance. Sumps pumps collect any liquid filter through the land fill, either from the rain water or leaking drums. This leach ate is treated and purified before released. Monitoring wells check ground water around the site to ensure that no toxins have escaped.
Concluding Remarks
Global waste production is a critical issue in environmental quality. Every day a huge amount of hazardous and toxic waste discharge into our natural environment. These materials throw into the environment without any treatment, which are very harmful for organisms live in the environment. Incineration is the important method for waste disposal. Incineration can destroy the organic compounds and it can be used to produce energy. Recycling is another method to reduce the pollution, which is occurring by hazardous waste. Reusing, demanufacturing and reducing material consumption are important additional strategies for reducing the waste stream.
(Shishir Reza, Environmental Analyst and Associate Member, Bangladesh Economic Association)

More News For this Category

Awareness needed among drivers and passengers to check fatal accidents

WITH the increase of traffic congestions, commuters' dependence on three-wheelers and motorcycles has contributed to increasing the number of road accidents. In the years, the number of fatal accidents have

Killing by police and filing case against five thousand people are not solutions

At least four people were killed and more than a hundred others injured on Tuesday as religious men clashed with police in Bhola's Borhanuddin upazila over a hate conversation spread

The Nexus

Md Bayazid Khan :In September 2019 I paid a short visit to Malaysia. I didn't believe even my two eyes to see the fabulous development of the country. Well planned

Real Estate

A. F. M. Asaduzzaman :Public facilities are basic needs of city dwellers for healthy and smart living. They are also related to the infrastructure of real estate and its surroundings.

Dhaka must intensify diplomatic move to end Rohingya crisis

DHAKA has urged again Myanmar to respect the human rights of Rohingyas and create friendly environment for their return to Rakhine State. In the 74th UNGA in UN headquarters, Dhaka

Government has to take blame for mismanagement in WASA

The Parliamentary Standing Committee on Public Undertakings has expressed utmost dissatisfaction over Dhaka Water Supply and Sewerage Authority for its failure in providing safe drinking water to citizens, dealing with

Grave Mistake

Mitch McConnell :Withdrawing U.S. forces from Syria is a grave strategic mistake. It will leave the American people and homeland less safe, embolden our enemies, and weaken important alliances. Sadly,

Message Of Cooperation

Michael Kugelman :In the current era of international diplomacy, high-level summitry has become a very public spectacle, replete with pageantry and photo opportunities. Top leaders meet at beautiful venues; they

Railway sector needs reform

THOUGH most of the trains running in the country's northwestern and southern regions face delay mainly due to inadequate capacity of railway tracks, Bangladesh Railway is adding new trains in

Arrest price hike of essential commodities

THE New Nation on Sunday reported that the soaring prices of essential commodities are causing huge sufferings to the low and middle-income groups of people. Of the commodities, price of